Manage your buildings energy with our extended TP&N range

01-12-2016

Monitoring and managing the energy usage in commercial buildings has never been so important. Businesses along with their facilities managers need to find ways to reduce the energy usage of their buildings, and by monitoring and measuring this they can start to identify any inefficiencies.

A key benefit of our latest range is the ability for the meters to automatically detect whether the configuration needs to be Pulsed or Modbus, enabling straightforward integration into either a data logger or a building management system which will provide you with more time to concentrate on the rest of the installation.

Our boards also come with a glazed door as standard, allowing the end user to read the meter without needing to gain direct access to the board.

Our latest range of Metered Power and Lighting Boards can help to provide the energy monitoring your building needs.

Our solutions

TP&N Power and Lighting Boards

Our range of dual metered TP&N Power and Lighting boards are available up to 24 (12+12) ways. Our dual metered TP&N Power and Lighting Boards feature:

• A comprehensive range of sizes from 10 to 24
• Both pan assemblies are rated at 125A so there is no requirement to pre-determine which load goes on which pan assembly
• Each meter output is independent with no requirement to subtract one reading from another, saving you time and removing the risk of confusion

TP&N Power, Lighting and Services Board

Our TP&N Power, Lighting and Services board comes with an 8+8+4 split across 20 ways, meaning you can configure the unit to suit most applications where the power, lighting and service loads such as HVAC are split for monitoring purposes.

Our TP&N Power, Lighting and Services board come with:

• Two separate meters. One monitoring the bottom two pan assemblies whilst the second monitors the top pan only
• The overall assembly is rated at 200A.
• Each pan assembly rated at 125A. Giving the designer the freedom to allocate any type of load to each of the pan assemblies
• Each meter output is independent with no requirement to subtract one reading from another, saving you time and removing the risk of confusion
• No requirement to assemble on site
• The installation process is the same as a standard TP&N board

TP&N Dual Metered Incomer

Our new solution is ideal where the power and lighting needs to be metered separately and two individual TP&N boards are to be used.

Our TP&N Dual Metered Incomer boards include:

• Space for incoming cables to be terminated and links from incomer to TP&N boards
• Ability to choose any of our standard TP&N boards to suit requirements of the installation
• Dual meter to monitor both boards independently
• Supplied complete with fixings and the cables to connect to the TP&N boards
• Two direct connection kits and relevant lugs to facilitate connection to the pan assemblies
• Available in 125A and 250A

The installation of the board is made easy as the rolled edges of the obround feature allow cables to pass between the two boards, removing the need for protection from sharp edges.

Triple Metered TP&N Incomer

The final addition to our extended Power and Lighting Board range is the Triple Metered TP&N Incomer.

This solution is perfect for applications where power, lighting and services (such as air conditioning units) need to be metered separately and three individual TP&N boards are to be employed.

Our solution comes with:

• Space for incoming cables to be terminated and links from incomer to TP&N boards
• Ability to choose any of our standard TP&N boards to suit the requirements of the installation
• Two meters with three separate outputs
• Complete with fixings for the incomer and the cables to connect to the TP&N boards
• Three direct connection kits and relevant lugs which will need to be fitted to the cable
• Available in 125A and 250A

Find out more about our Enhanced Metered & Triple Metered Boards here